What's new · Datum and Recon

What changed, release by release.

Both apps, newest first. Every Recon installer is listed with its SHA-256, so you can check what you downloaded; both checksums are also on the download page. Early-access builds are frequent and not yet code-signed.

Nothing is lost, and the size follows your hand.

  • Nothing is lost. Leaving a part with changes asks to save, and the changes are kept aside if the window closes.
  • Type a size mid-drag. Tab or a digit turns the value into a field (46, 46 k6, +1); Shift pulls in tenths.
  • One key, one meaning. F fits the view, R is the fillet, Space looks straight at a face; a new operation waits for OK or Esc. The keys
  • The say bar also searches operations, views, faces by name and exports. Faces are named in words: ø45 k6 bearing journal · step 2 of 5. Say it like the drawing
  • Pictures of every part on Home, and a Mouse setting for SolidWorks, Blender, Fusion and Inventor hands.

Three drawings already read, and a verdict in plain words.

  • Three drawings already read come with Recon. Open one and watch it build and check every size, with no key and nothing charged. Your first drawing, checked
  • The verdict reads in plain words, and what needs a look is amber.
  • Balloons step off the callouts they number.
  • D shows the sheet, R the replay. The keys
  • Links on this website open the samples in Recon: try one.

Chamfers at any angle, inch threads, and one key per operation.

Datum 0.1 is the first build of the part modeller we hand to people outside MARTENSIA: the twelve operations, sizes with their tolerances, datums and geometric tolerances on named faces, the drawing generated from the model, and STEP AP242 with the PMI inside.

New in this build

  • Chamfers at any angle. Type 2 x 20° in the card or the say bar. Chamfer
  • Inch threads. 1/4-20 UNC, 7/16-20 UNJF and the rest, with their tap drills. Thread
  • From Recon to Datum. Recon writes a drawing as a Datum part: Open in Datum from Recon's Files tab.
  • One key per operation. T turn, G groove, H hole, R radius (fillet) and the rest; F fits the view; ? shows them all. The keys

Known limits

  • Single machined parts from a bar, a tube or a plate. No assemblies, surfaces, sheet metal or rendering.
  • No sketch-based features yet: a profile you draw comes after the drawing generator.
  • The interface is in English; Windows only, and the installer is not yet code-signed.

Everything Datum can't do (yet) →

The first public build.

Recon 0.1 is the first build we hand to people outside MARTENSIA. It carries the full set of tools, a light and a dark theme, and the workspace we intend to keep: a home screen that takes any file, an activity list of every run, and one result screen per tool.

Drawings

  • Drawing → 3D. A parametric model built from a PDF, DXF, scan or photo; every requirement numbered on the sheet and checked on the model; the build replayed operation by operation. Millimetres and inches; ISO and ASME; limits, zones and bracketed tolerances; threads, counterbores and bolt circles; Spanish and German callouts.
  • Drawing ↔ STEP. Your own model checked against its drawing, callout by callout, with a ballooned PDF out.
  • Drawing + scan. A worn part measured against its drawing's limits, with a wear map and a list of what to restore.
  • Sheet → DXF. Exact from a CAD PDF, traced from an image, at true size when the sheet states its scale, with the kinds of line on separate layers.
  • Variants and handedness. A drawing that defines several variants builds the one you pick; a mirrored part is checked for its handedness.
  • Rebuild without a new reading. Change a parameter on the Details tab and the model is rebuilt without reading the sheet again.

Scans

  • Scan ↔ CAD. Deviation map with instant recolouring, every size and GD&T characteristic measured, ISO 14253-1 verdicts (in, out, too close to call), AP242 semantic PMI read from the STEP, ISO 286 fits and ISO 2768 general tolerances built in, fit codes overridable per feature.
  • Scan → CAD. Plates, bodies of revolution and castings rebuilt as design-intent solids; fillets, chamfers, threads and tapers named; free-form regions kept as skin; several scans of one part merged.
  • Demo part. A generated part with a chosen defect and a simulated scan. The second build replaces it with three drawings already read and a scan checked against its CAD.

Batch and API

  • Batch. A folder or a PDF set estimated first and run within a limit; one archive out with a folder per part and a sheet of the title blocks. Parts built before cost nothing.
  • API. Jobs over HTTP with signed webhooks; keys made in Settings.

The app

  • Light theme by default, dark and system themes in Settings.
  • The engine can be restarted from Settings, and the app says so when it stops answering.
  • Keyboard: Ctrl E exports, Space and the arrows drive the replay, ? lists every shortcut. The keys
  • Dense sheets get smaller balloons; a chosen requirement is boxed on the sheet and flown to in 3D.

Known limits

  • Single parts only: assemblies and sheet-metal flat patterns are not built yet.
  • A requirement inside a section view, or placed by ordinate dimensions, is checked for size but its position may come back as unknown.
  • "Found" is evidence, not proof: an ambiguous sheet can be read in a way that satisfies the check. The open questions are listed for your engineer for that reason.
  • Windows only; the installer is not yet code-signed, so SmartScreen asks once.
  • The interface is in English; a Spanish interface is planned.

Everything Recon can't do (yet) →