Help · Datum 0.1
What Datum can't do (yet).
Before you plan a part around Datum, here is what it doesn't do today. Where a limit is for good, we say so.
The parts it models
- No assemblies, surfaces, sheet metal or rendering, and that won't change.Datum is for single machined parts. A STEP from Datum opens in any CAD you already use.
- A part starts from a round, hex or square bar, a tube or a plate, and is cut with the nineteen operations.Shafts, bushings, flanges, hubs, housings, blocks, plates and covers fit; anything that needs another kind of stock doesn't.
- No profile you draw yourself yet.Sketch-based features come after the drawing generator.
- No cut-to-length operation and no mirror pattern yet.
Operations
- A chamfer or a radius can't run through a hole, a counterbore, a countersink or a side face that sits closer to the edge than its own size.The build stops and the message names that feature and the distance, so you can change one or the other.
- A hole standard that isn't in the tables stops the build.Type the diameter instead, or pick a size the tables carry (ISO 273 clearance holes, ISO 4762 counterbores, tap drills).
- A bolt circle can't be slid with the pointer.Change its pitch circle and angle in its card.
- A diameter that carries a thread can't be pulled.The thread sets it; change the thread instead.
The drawing
- Dragging a dimension on the sheet doesn't move the feature yet.Click the dimension and type the new size: it lands in the field that sets it.
- Chamfers and radii are written on the drawing as notes, not as dimensions.
- The sheet is A4, A3 or A2, at 1:1, 1:2, 1:5, 1:10, 2:1 or 5:1.
Files
- A datum that no tolerance refers to is not written to the STEP.
- Recon doesn't read a runout back from Datum's STEP yet.The other sizes, datums and geometric tolerances it does read.
Viewer, keys and platform
- Without a key, or when a key ends, Datum is a viewer.You can open a part, look at its sizes and tolerances, and export STEP, STL or 3MF of what you opened. You can't edit, draw or save.
- Keys are not on sale yet.Datum is in its pilot programme; ask for a pilot place.
- Windows only for now. A macOS build is planned.
- The interface is in English; a Spanish interface is planned.
- The installer is not yet code-signed, so Windows asks once before it runs.
Checked against Datum's documentation and this site on 4 November 2026. Something missing or wrong? Tell us.