Help · Recon 0.1
What Recon can't do (yet).
Recon reads, builds and checks, and your engineer signs. Here is what it doesn't do today, so you know where the signature has to look harder.
Drawings it reads
- Single parts only: no assemblies and no sheet-metal flat patterns yet.
- Reading a new drawing needs the internet and an Anthropic key.The drawing's image and text go to Anthropic's API, on servers in the United States. The three samples were read in advance and open offline.
- It doesn't open DWG files.Save the drawing as DXF first.
- From a DXF, it builds the part but can't yet confirm where each size is drawn.
- A sheet with no size it can check, such as a cover sheet or an assembly view, stops before the build.Recon says what the sheet is and asks which part you mean.
- On a tabulated drawing, one sheet for many sizes, you name the size to build.
Checking
- "Found" is evidence, not proof.It means the model has a feature of that size where the drawing points. An ambiguous sheet can be read in a way that passes the check; that is why the open questions go to your engineer.
- A size inside a section view, or placed by ordinate dimensions, is checked for size, but its place may come back as unknown.
- When you bring your own model (Drawing ↔ STEP), geometric tolerances, roughness and notes are listed, not checked, and the mirror-image check doesn't run.
- The mirror-image check stops when the sheet states no projection method.
- Recon doesn't accept or release parts.It is not a substitute for the inspection your quality system requires.
Scans
- Cones, countersinks, threads and runout are not checked on a scan yet.A tolerance Recon can't check is listed as "not supported" in the report, never dropped.
- A thickness needs both sides scanned.A one-sided scan reports it as "not measurable" instead of guessing.
- With a noisy scanner, flatness and profile often come back "uncertain" rather than pass or fail.
- Very tight zones need a CMM, and small deep holes a gauge.The report says which.
- The deviation map uses a best fit, not the datum frame. Positions use the datum frame.
- A datum feature with no geometry in the STEP can't be used, and datum targets on curved surfaces are treated as flat.
- Flatness takes about a second per face, so a part with 90 flat faces takes about a minute and a half.
- Our scan figures come from simulated scans; the simulator is not yet calibrated against real ones.
Parts rebuilt from a scan
- On milled outlines, chamfers and radii under 1.5 mm come out as sharp corners.
- A thread comes out as a plain cylinder at its major diameter.
- A casting's body stays as scanned: a smooth skin, not a designed surface.
What it needs
- Windows only for now. A macOS build is planned; the engine runs on Linux for server installations.
- The installer is not yet code-signed, so Windows asks once before it runs.
- The interface is in English. The drawings may be in Spanish or German; a Spanish interface is planned.
- No automatic updates yet: run the new installer over the old one.
- The server build is not in the installer; it comes with a pilot.
- Through the API, a job that was running when the engine stopped is not restarted: submit it again.
Checked against Recon's documentation, its benchmarks and this site on 4 November 2026. Something missing or wrong? Tell us.