Skip to main content
MARTENSIA
  • Products ▾
    ReconDrawings and scans to checked 3D DatumThe part modeller Seal3D review, approval and delivery
  • Custom software
  • Consulting
  • ToolsFree
  • Learn
  • Company
ES Contact
Terms of use

What you can do with Recon, and the short list of what you can't.

These terms govern the use of this website and of Recon while it is in early access. A pilot agreement signed with you takes precedence over them where the two differ.

Version 1.0 Effective 2 November 2026 Governing law Spain
On this page
  1. Agreement and parties
  2. The early-access licence
  3. Your files and results
  4. Your responsibilities
  5. What you can't do
  6. Fees
  7. Warranty and liability
  8. Changes and ending
  9. Governing law
Something unclear?
hello@martensia.com

01Agreement and parties

This is an agreement between you, or the organisation you act for, and MARTENSIA S.L. ("MARTENSIA"), a company established in Spain, tax number B05786322, registered office at Calle Puerta de Utrera 5A, 41600 Arahal (Sevilla), Spain. By installing or using Recon, or by using this website, you accept these terms. If you act for an organisation, you confirm you may bind it.

02The early-access licence

Plain language

You may install Recon on the computers of your organisation and use it for your own work, including commercial work, while early access lasts. We may change the software and these terms as the product matures, and we will say so in the release notes.

MARTENSIA grants you a non-exclusive, non-transferable licence to install and run the Recon software made available on this site, in object-code form, on computers under your organisation's control, for the purpose of evaluating and using it in your organisation's own activities. The licence lasts for the early-access period and any further period agreed in writing.

Recon contains open-source components; their licences are listed in the application (Settings → About) and apply to those components as stated there.

03Your files and results

Everything you put into Recon stays yours: drawings, scans and models. Everything Recon produces for you is yours too: the STEP, STL and DXF files, the reports, the ballooned sheets and the build scripts. You may use them, modify them and give them to others, for any purpose, without owing us anything further.

MARTENSIA does not receive your files or your results, except on the free drawing page described below. See the privacy policy for what the AI tools send to Anthropic under your own key.

The free drawing page. The free page is not open yet; this applies when it opens. When you drop a drawing on martensia.com/try, you send it to us so that we can build and check it, and you confirm that you may share it with us and with Anthropic for that purpose. We use it only to build, check and show your result, and we delete it, with its result, 24 hours later. The result is yours, as above. The free page is offered as it is, with daily limits, and we may change or stop it at any time. A result is open to anyone who has its link until it is deleted, so share the link with care.

04Your responsibilities

  • Your API key. The AI tools use an Anthropic API key you provide. Your use of their service is governed by your agreement with Anthropic, and the charges for it are yours.
  • Checking the results. Recon produces models, measurements and verdicts as an aid to a qualified person. It does not replace the review of a competent engineer, nor the inspection your quality system or your customer requires. A part is accepted, released or manufactured on the decision of your engineer, not of the software.
  • Safety-relevant parts. Where a part's failure could injure people or cause serious damage, you must independently verify the geometry and the measurements before relying on them.
  • Lawful use. You confirm you have the right to process the drawings and scans you give Recon, including any personal data in them.

05What you can't do

  • Sell, rent, sublicense or redistribute the Recon software itself, or offer it as a service to third parties, without a written agreement with us.
  • Reverse-engineer, decompile or disassemble the software except to the extent the law expressly allows it.
  • Remove or alter notices of ownership, or present the software as your own.
  • Use the software to break the law, or to infringe someone else's rights.

06Fees

Prices are not published yet. Until the products are released, the price and terms of any early access or pilot are those of the written agreement for it, in EUR excluding VAT. The free plan carries no fee. Plans are billed monthly by card or annually by SEPA direct debit or bank transfer; prepaid packs are not refundable once readings have been consumed. During early access, AI readings may run under an Anthropic API key you provide, in which case Anthropic bills that usage to you directly and MARTENSIA does not receive it. We may change list prices with 30 days' notice; a plan already paid for keeps its price for its term. Spanish VAT applies to customers in Spain; EU business customers with a valid VAT number are invoiced under the reverse charge.

07Warranty and liability

Recon is early-access software. It is provided as is, without warranty of any kind, express or implied, including fitness for a particular purpose. We do not warrant that a model is correct, that a measurement is accurate, or that the software is free of errors or will run without interruption. We will fix what we can and say what we cannot.

To the extent permitted by law, MARTENSIA's total liability arising from the software or this website is limited to the fees you paid us for the software in the twelve months before the claim, and we are not liable for indirect or consequential losses, lost profits, or the cost of parts made from an incorrect model. Nothing in these terms limits liability for wilful misconduct, gross negligence, death or personal injury, or any liability that cannot be limited under the law that applies to you. Rights that consumers have under Spanish and EU law are not affected.

08Changes and ending

We may update these terms as Recon moves from early access to release. The current version is always on this page, with its date; a material change is also noted in the release notes. Continued use after a change means you accept it. Either side may end the licence at any time; you by uninstalling the software, we by written notice. Sections 03, 07 and 09 survive the end of the licence.

09Governing law

These terms are governed by Spanish law. Disputes that cannot be settled by talking go to the courts of Seville, Spain, unless the law gives you a right to another forum.

MARTENSIA

Custom software, 3D technology and IT consulting. Made in Spain.

Español

Products
  • Recon
  • Datum
  • Seal
  • What's new
Services
  • Custom software
  • Consulting
  • Research and development
  • How we work
Free tools
  • Check a DXF
  • SVG to DXF
  • Picture to DXF
  • STEP viewer
  • All free tools
Resources
  • Learn
  • Keys
  • What Datum can't do
  • What Recon can't do
Company
  • About
  • Contact
  • Downloads
© 2026 MARTENSIA S.L. · NIF B05786322. Recon, Datum and Seal are MARTENSIA products. Page updated 12 November 2026.
Privacy Terms Security